8°C | 0% - 50% | 1.052 - 1.032
10°C | 50% - 75% | 1.032 - 1.022
13°C | 75% - 90% | 1.022 - 1.016
16°C | 90% - 100% | 1.016 - 1.012
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
glottis wrote: mimochodem zda se mi tam vzdycky skok nahoru, pri zvednuti teploty. Pocita to nejakou kompenzaci hustoty podle teploty? Je to vlastne klasicky cukromer tak je potreba s teplotou pocitat.
Q. Does the SG reported by the Tilt compensate for the current temperature automatically?
A. Due to the polycarbonate housing of the the Tilt, no correction is needed for 38F to 98F. Temperatures above 98F result in an decrease of SG of about 1 point per 10F. i.e. water at around 160F will read 0.994.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
T0mica wrote: Zdravím, zrovna kvasím svůj první ležák, tak jaká máte po roce zkušenosti s těmi různými přístupy? Nevím jestli zůstat na 10°C nebo jestli po prokvašení začít teplotu zvyšovat...Díky moc za rady.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
No events |